Free NSE4_FGT-7.0 Dump

40.Refer to the exhibits.

Exhibit A.

 

Exhibit B.

The SSL VPN connection fails when a user attempts to connect to it.

What should the user do to successfully connect to SSL VPN? A. Change the SSL VPN port on the client.

B. Change the Server IP address.

C. Change the idle-timeout.

D. Change the SSL VPN portal to the tunnel.


Answer:
A

Explanation:

Reference: https://docs.fortinet.com/document/fortigate/5.4.0/cookbook/150494

 

41.Which two inspection modes can you use to configure a firewall policy on a profile-based nextgeneration firewall (NGFW)? (Choose two.)

A. Proxy-based inspection

B. Certificate inspection

C. Flow-based inspection

D. Full Content inspection

 

 

42.Which statement about the policy ID number of a firewall policy is true? A. It is required to modify a firewall policy using the CLI.

B. It represents the number of objects used in the firewall policy.

C. It changes when firewall policies are reordered.

D. It defines the order in which rules are processed.


Answer:
A

 

 

43.Which two protocols are used to enable administrator access of a FortiGate device? (Choose two.)

A. SSH

B. HTTPS

C. FTM

D. FortiTelemetry


Answer:
A,B

Explanation:

Reference: https://docs.fortinet.com/document/fortigate/6.4.0/hardening-yourfortigate/995103/buildingsecurity-into-fortios

 

44.A network administrator is configuring a new IPsec VPN tunnel on FortiGate. The remote peer IP address is dynamic. In addition, the remote peer does not support a dynamic DNS update service. What type of remote gateway should the administrator configure on FortiGate for the new IPsec VPN tunnel to work? A. Static IP Address

B. Dialup User

C. Dynamic DNS

D. Pre-shared Key


Answer:
B

Explanation:

Dialup user is used when the remote peer’s IP address is unknown. The remote peer whose IP address is unknown acts as the dialup clien and this is often the case for branch offices and mobile VPN clients that use dynamic IP address and no dynamic DNS

 

45.An administrator wants to configure timeouts for users. Regardless of the user€™s behavior, the timer should start as soon as the user authenticates and expire after the configured value.

Which timeout option should be configured on FortiGate?

A. auth-on-demand

B. soft-timeout

C. idle-timeout

D. new-session

E. hard-timeout


Answer:
E

Explanation:

Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD37221#:~:text=Hard%20timeout%3A%20User %20entry%20will,(5%20minutes%20by%20default)

 

46.Refer to the exhibit.

Given the routing database shown in the exhibit, which two statements are correct? (Choose two.) A. The port3 default route has the highest distance.

B. The port3 default route has the lowest metric.

C. There will be eight routes active in the routing table.

D. The port1 and port2 default routes are active in the routing table.


Answer:
A,D

 

 

47.Refer to the exhibit.

Examine the intrusion prevention system (IPS) diagnostic command.

Which statement is correct If option 5 was used with the IPS diagnostic command and the outcome was a decrease in the CPU usage?

A. The IPS engine was inspecting high volume of traffic.

B. The IPS engine was unable to prevent an intrusion attack.

C. The IPS engine was blocking all traffic.

D. The IPS engine will continue to run in a normal state.


Answer:
A

Explanation:

Reference: https://docs.fortinet.com/document/fortigate/6.2.3/cookbook/232929/troubleshooting-highcpu-usage

 

48.Which statement correctly describes NetAPI polling mode for the FSSO collector agent? A. The collector agent uses a Windows API to query DCs for user logins.

B. NetAPI polling can increase bandwidth usage in large networks.

C. The collector agent must search security event logs.

D. The NetSession Enum function is used to track user logouts.


Answer:
D

Explanation:

Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD34906

https://kb.fortinet.com/kb/microsites/search.do?cmd=displayKC&docType=kc&externalId=FD34906&slice

Id=1&docTypeID=DT_KCARTICLE_1_1&dialogID=210966035&stateId=1%2 00%20210968009%27)

 

49.Refer to the exhibit.

An administrator has configured a performance SLA on FortiGate, which failed to generate any traffic.

Why is FortiGate not sending probes to 4.2.2.2 and 4.2.2.1 servers? (Choose two.) A. The Detection Mode setting is not set to Passive.

B. Administrator didn’t configure a gateway for the SD-WAN members, or configured gateway is not valid.

C. The configured participants are not SD-WAN members.

D. The Enable probe packets setting is not enabled.


Answer:
B,D

 

 

50.Which two statements about SSL VPN between two FortiGate devices are true? (Choose two.) A. The client FortiGate requires a client certificate signed by the CA on the server FortiGate.

B. The client FortiGate requires a manually added route to remote subnets.

C. The client FortiGate uses the SSL VPN tunnel interface type to connect SSL VPN.

D. Server FortiGate requires a CA certificate to verify the client FortiGate certificate.


Answer:
C, D

Explanation:

Reference: https://docs.fortinet.com/document/fortigate/6.2.9/cookbook/266506/ssl-vpn-with-certificateauthentication

 

51.Refer to the exhibit.

The exhibit displays the output of the CLI command: diagnose sys ha dump-by vcluster.

Which two statements are true? (Choose two.)

A. FortiGate SN FGVM010000065036 HA uptime has been reset. B. FortiGate devices are not in sync because one device is down.

C. FortiGate SN FGVM010000064692 is the primary because of higher HA uptime.

D. FortiGate SN FGVM010000064692 has the higher HA priority.


Answer:
A,D

Explanation:

1. Override is disable by default – OK

2. “If the HA uptime of a device is AT LEAST FIVE MINUTES (300 seconds) MORE than the HA Uptime of the other FortiGate devices, it becomes the primary”

The question here is: HA Uptime of FGVM01000006492 > 5 minutes? NO – 198 seconds < 300 seconds (5 minutes) Page 314 Infra Study Guide.

https://docs.fortinet.com/document/fortigate/6.0.0/handbook/666653/primary-unit-selection-with-overridedisabled-default

 

52.An administrator has configured outgoing Interface any in a firewall policy.

Which statement is true about the policy list view? A. Policy lookup will be disabled.

B. By Sequence view will be disabled.

C. Search option will be disabled

D. Interface Pair view will be disabled.


Answer:
D

Explanation:

https://kb.fortinet.com/kb/documentLink.do?externalID=FD47821

 

53.Which type of logs on FortiGate record information about traffic directly to and from the FortiGate management IP addresses?

A. System event logs

B. Forward traffic logs

C. Local traffic logs

D. Security logs


Answer:
C

Explanation:

Reference: https://docs.fortinet.com/document/fortigate/5.4.0/cookbook/476970

 

54.Refer to the web filter raw logs.

Based on the raw logs shown in the exhibit, which statement is correct?

A. Social networking web filter category is configured with the action set to authenticate.

B. The action on firewall policy ID 1 is set to warning.

C. Access to the social networking web filter category was explicitly blocked to all users.

D. The name of the firewall policy is all_users_web.


Answer:
A

 

 

55.By default, FortiGate is configured to use HTTPS when performing live web filtering with FortiGuard servers.

Which CLI command will cause FortiGate to use an unreliable protocol to communicate with FortiGuard servers for live web filtering? A. set fortiguard-anycast disable

B. set webfilter-force-off disable

C. set webfilter-cache disable

D. set protocol tcp


Answer:
A

Explanation:

Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD48294

 

56.Which two settings can be separately configured per VDOM on a FortiGate device? (Choose two.)

A. System time

B. FortiGuaid update servers

C. Operating mode

D. NGFW mode


Answer:
C,D

Explanation:

C: “Operating mode is per-VDOM setting. You can combine transparent mode VDOM’s with NAT mode VDOMs on the same physical Fortigate.

D: “Inspection-mode selection has moved from VDOM to firewall policy, and the default inspection-mode is flow, so NGFW Mode can be changed from Profile-base (Default) to Policy-base directly in System >

Settings from the VDOM” Page 125 of FortiGate_Infrastructure_6.4_Study_Guide

 

57.Refer to the exhibit.

The global settings on a FortiGate device must be changed to align with company security policies.

What does the Administrator account need to access the FortiGate global settings?

A. Change password

B. Enable restrict access to trusted hosts

C. Change Administrator profile

D. Enable two-factor authentication


Answer:
C

Explanation:

Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD34502

 

58.Which three statements about a flow-based antivirus profile are correct? (Choose three.) A. IPS engine handles the process as a standalone.

B. FortiGate buffers the whole file but transmits to the client simultaneously.

C. If the virus is detected, the last packet is delivered to the client.

D. Optimized performance compared to proxy-based inspection.

E. Flow-based inspection uses a hybrid of scanning modes available in proxy-based inspection.


Answer:
B,D,E

Explanation:

Reference: https://forum.fortinet.com/tm.aspx?m=192309

 

59.In which two ways can RPF checking be disabled? (Choose two ) A. Enable anti-replay in firewall policy.

B. Disable the RPF check at the FortiGate interface level for the source check

C. Enable asymmetric routing.

D. Disable strict-arc-check under system settings.


Answer:
C,D

Explanation:

Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD33955

 

Trả lời

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *

you are using free dumps!!!

Please help to click ads to support the website

DỊCH VỤ iT